Connection technology
Push-in CAGE CLAMP®
Actuation type
Push-button
Connectable conductor materials
Copper
Nominal cross-section
4 mm²
Solid conductor
0.5 … 6 mm² / 20 … 10 AWG
Solid conductor; push-in termination
1 … 6 mm² / 14 … 10 AWG
Fine-stranded conductor
0.5 … 6 mm² / 20 … 10 AWG
Fine-stranded conductor; with insulated ferrule
0.5 … 4 mm² / 20 … 12 AWG
Fine-stranded conductor; with ferrule; push-in termination
1.5 … 4 mm² / 18 … 12 AWG
Note (conductor cross-section)
Depending on the conductor characteristic, a conductor with a smaller cross-section can also be inserted via push-in termination.
Strip length
11 … 13 mm / 0.43 … 0.51 inches
Wiring direction
Front-entry wiring
Rated voltage (IEC/EN 60947-7-1)
800 V
Impulse withstand voltage
8 kV
Rated current (IEC/EN 60947-7-1)
32 A
Current at max. conductor cross-section
41 A
UL 1059 rated voltage
600 V
UL 1059 rated current
30 A
CSA 22.2 No 158 rated voltage
600 V
CSA 22.2 No 158 rated current
30 A
ATEX rated voltage (Ex e II)
550 V
ATEX rated current (Ex e II)
31 A
ATEX rated current with bridge (Ex e II)
30 A
Power loss per pole (potential)
1.024 W
Resistance value for specified current-dependent power loss
0.001 Ω
Total connection points
4
Number of bridging slots
2
Width
6.2 mm / 0.244 inches
Height
78.7 mm / 3.098 inches
Depth from top edge of DIN rail
32.9 mm / 1.295 inches
Mounting type
DIN-35 rail
Marking level
Central/lateral marking
Insulation material
Polyamide (PA 66)
Flammability class (UL 94)
V0
Processing temperature
-35 … +85 °C
Continuous service temperature
-60 … +105 °C
RoHS compliance status
Compliant, No Exemption
General approvals
EN 60947, CSA 22.2, UL 1059, KEMA/KEUR
Marine approvals
ABS, Bureau Veritas, DNV GL, Lloyds Register
Hazardous area approvals
ATEX, IECEx, UL 60079, CCC CNEx, INMETRO
